General purpose solid welding wire suitable for the all positional Gas Metal Arc Welding (GWAW) of mild and low alloy steels, used in general fabrication and for welding of light to medium gauge sheet and tubular steel sections.
Please Note: A suitable shielding gas is required.

Autocraft LW1-6 is a high quality copper coated welding wire suitable for the all positional Gas Metal Arc Welding (GMAW) of mild and low alloy steels, used in general fabrication and structural work. The high quality copper coating ensures problem free feeding, smooth current pick-up and minimal contact tip wear. The higher silicon content of Autocraft LW1-6 ensures excellent operator appeal, improved fillet shape / side wall wash at weld toes and very low spatter levels important for welding light to medium gauge sheet and tubular steel sections.

Self-shielded flux cored wire. For single pass applications only. Versatile, all positional capabilities. Excellent tolerance to joint misalignment or poor joint fit-up.
Smooth rippled fillets with good edge wetting. Ideal for welding thin section mild and galvanised steels.

Low cost and great quality, Verti-Cor XP is a versatile rutile type flux cored wire designed for all positional fillet and butt welding applications using Argon + 18-25% CO2 and CO2 shielding gases. Verti-Cor XP is characterised by its smooth transfer arc characteristic and all positional capabilities while offering smooth genuine mitre fillets in all positions. Vacuum packed.

Verti-Cor 3XP is a Grade 3 micro-alloyed Rutile type flux cored wire designed for downhand, vertical-up and overhead fillet and butt welding applications. A micro-alloyed, Rutile type fluxed cored wire. Versatile, all positional capabilities, Excellent operator appeal, Formulated to give smooth(low spatter) arc transfers, flat mitre filled welds and excellent slag lift in all positions (except vertical-down), on a wide range of mild and medium strength steels.

Metal-Cor 3 is a next generation metal cored wire offering the operator appeal of a metal cored wire with deposition rates similar to that of solid wire and combining impressive low temperature impact values comparable to those of a Grade 3 wire. Metal-Cor 3 offers a wide range of operating parameters and is ideal for high productivity welding of mild and medium strength carbon steels. Metal-Cor 3 produces low fume levels, low spatter and excellent edge wetting for outstanding operator appeal.

Contact us for ordering information

Autocraft 309LSi is a premium quality, low carbon 24% Cr/13% Ni stainless steel wire for the Gas Metal Arc Welding (GMAW) of matching 309L type stainless steel. Autocraft 309LSi is also suitable for a wide range of other welding applications including: The dissimilar joining of “300 series” and selected “400series” stainless steel grades to mild or low alloy steels, An intermediate or buttering layer in the butt welding of clad steels, A stainless steel overlay on mild or low alloy steel, A ‘buttering’ layer prior to hardfacing.

Autocraft 316LSi is a premium quality, low carbon 19% Cr/13% Ni / 2.5Mo stainless steel wire for the Gas Metal Arc Welding (GMAW) of Molybdenum bearing stainless steels; in particular 316, 318 and 316L alloys. Autocraft 316LSi is also suitable for the general welding of other 300 and 400 series stainless steels including 301, 302, 304/304L, 321, 347, 410 and 430.

Autocraft AL5183 is a premium quality Aluminium welding wire that is typically used in the marine and structured industries, where higher strength and good fracture toughness is required.
For the GMAW welding of wrought and cast aluminium alloys containing magnesium.

Superior surface cleanliness for improved resistance to porosity.

Contact us for ordering information.

Autocraft AL5183XP is a premium quality Aluminium welding wire that is typically used in the marine and structured industries, where higher strength and good fracture toughness is required. Autocraft AL5183XP is ideally suited to the welding of Alloy 5083. Autocraft AL5183XP is not suitable for heat treatment.

Contact us for ordering information.

Autocraft AL5356 is a premium quality, Aluminium - nominal 5% Magnesium alloy suitable for the Gas Metal Arc Welding (GMAW) of a wide range of cast and wrought Aluminium alloys. Autocraft AL5356 is the most popular Aluminium alloy in the CIGWELD range. It produces intermediate deposit strength and good ductility and corrosion resistance for the GMA welding of a wide range of 3XXX, 5XXX, 6XXX and 5XX Aluminium alloys.

Autocraft Silicon Bronze is a Copper based wire recommended for the Gas Metal Arc Welding (GMAW) of Copper-Silicon alloys used extensively in hot water systems, heat exchangers, calorifiers and marine components for their corrosion resistance.
Autocraft Silicon Bronze is highly recommended for the fillet welding of galvanised steels and irons and for the lower strength ‘brazing’ of light gauge steel sections as used in the automotive industry. It is also suitable for the MIG welding of Copper-Zinc alloys to themselves and to steels.

Comweld LW1-6 is a copper coated, low carbon steel filler rod suitable for Gas Tungsten Arc (TIG) welding of a wide range of mild and medium strength steels. Comweld LW1-6 is recommended for the TIG welding of steel pipes, plates and castings with a tensile strength in the 500 MPa class. It is tolerant to surface rust and mill scale and is ideal for root pass welding applications where tough and ductile welds are produced.

Please Note: A suitable shielding gas is required.

Comweld LW1 is a copper coated, double deoxidised low carbon steel filler rod suitable for the oxy-acetylene (fusion) welding of Gas Tungsten Arc (TIG) welding of a wide range of mild and medium strength steels.

Comweld Super Steel is a copper coated ‘triple deoxidised’ steel welding rod recommended for the high quality Gas Tungsten Arc (TIG) welding of carbon and carbon-Manganese steels. Comweld Super Steel is deoxidised with Titanium, Aluminium and Zirconium in addition to Manganese and Silicon for improved weld deposit quality. It is the ideal choice for TIG welding rusty or mill scaled plates and pipes and the root pass welding of pipes, tanks and heavy walled root toughness and radiographic soundness are achieved under high dilution.

Comweld CrMo1 is a copper coated steel TIG welding rod alloyed with nominally 1.25% Chromium (Cr) and 0.50% Molybdenum (Mo). It is recommended for the TIG welding of 1/2Cr-1/2Mo, 1Cr1/2Mo and 1 1/4Cr-1/2Mo steel pipes, plates and castings used at elevated service temperatures (up to 550°C) in the power and petrochemical industries etc. Comweld CrMo1 is also suitable for the dissimilar TIG welding of Cr-Mo steel to carbon steel and for the welding of case hardenable steels or steels which can be subsequently heat treated.

Comweld CrMo2 is a copper coated steel TIG welding rod alloyed with nominally 2.5% Chromium (Cr) and 1.0% Molybdenum (Mo).It is recommended for the TIG welding of 2 1/4Cr - 1 Mo and CrMo-V steel pipes, plates and castings used at elevated service temperatures (up to 600°C) in the power and petrochemical industries etc. Comweld CrMo2 is also suitable for the dissimilar TIG welding of selected Cr-Mo steels to carbon steel and for the TIG welding of heat treatable steels and case hardenable steels with up to 3% Chromium content.

Comweld 308L stainless steel is a high quality low carbon rod for the Gas or Gas Tungsten Arc (TIG) welding of a wide range of low carbon and stabilised 300 series stainless steels. It is recommended for the critical welding of 304 and 304L stainless steels in corrosion resistant and cryogenic applications.

Comweld 309L stainless steel is a high quality low carbon rod for the Gas or Gas Tungsten Arc (TIG) welding of highly alloyed 309 or 309L type stainless steels. Comweld 309L is also suitable for the dissimilar joining of other 300 series austenitic stainless steels to ferritic steels.

Comweld 316L stainless steel is a high quality low carbon rodfor the Gas or Gas Tungsten Arc (TIG) welding of Molybdenum bearing stainless steels; in particular matching 316 and 316L alloys. Comweld 316L is also suitable for the general welding of other 300 series stainless steels including 302 and 304; as well as ferritic stainless steels grades such as 409, 444 and 3Cr12.

A high performance General Purpose (GP) welding electrode suitable for all positional welding, except vertical-down, for use on, mild and galvanised steel pipes, plates, angle iron, RHS, tubes and grid mesh.

A user-friendly General Purpose (GP) electrode offering a quiet, smooth arc action with a 6013 classification (min. strength rating of 60,000PSi).
Ideal for welding thin section mild, galvanised and rusty steels and weld joints with poor fit-up. Great for use on vertical down fillet welding applications.
Weldskill GP produces smooth professional mitre fillet welds in all positions with very low spatter levels, it features positive re-strike (hot or cold) and a self-releasing slag.

Ferrocraft 61 is the latest smooth running, user friendly hydrogen controlled electrode from CIGWELD.
Ferrocraft 61 gives improved side wall wash and reduced undercut at weld toes and produces very low spatter levels for an electrode of its type. Fillet weld shape is excellent and exhibits a true mitre to slightly convex profile.
Improved arc characteristics and stability on low Open Circuit Voltage welding machines (≥55 O.C.V.) ensure Ferrocraft 61 has the high operator appeal Welders demand from today’s manual arc electrodes.

OK 53.16 is a double-coated electrode combining the running characteristics of a rutile electrode with the mechanical properties of a basic electrode. OK 53.16 welds on both AC and DC and the spatter loss is minimal.

WELDiT ALL is a highly alloyed stainless steel electrode that is extremely resistant to cracking (min. strength of 110,000PSi) it provides smooth, stable running in all positions (except vertical down) especially on
low current settings.
WELDit ALL is recommended for the repair and maintenance of all steels, particularly those of unknown composition.
It is suitable for; Joining dissimilar steels, such as stainless steel to carbon steel, Repairing die or tool steels, as a protective overlay against corrosion and as an intermediate or buffer layer prior to hard surfacing. Not Recommended for Welding Cast Irons.

Contact us for ordering information.

WELDSKILL 316L stainless steel electrode has been formulated for the all positional (except vertical-down) fillet and butt welding of stainless steels. 316L produces low spatter levels with a smooth-running bead. Weldskill 316L is suitable for a wide range of Molybdenum bearing stainless steels, suitable for the general-purpose welding of other Austenitic stainless steels including 301, 302, 303 and 304/304L, 305, 3CR12 types. WeldSkill 316L is also suitable for the general welding of 400 series stainless steels including 410 and 430.

HARDA is designed for hard surfacing of steel components subjected to wet or dry hard particle abrasion and low to moderate impact loading. The air hardening (~55RHc), low alloy steel deposit of WELDSKILL HARDA remains crack free on most steels and is therefore recommended for hard surfacing components subject to flexing during service. Typical applications include the surfacing of agricultural points, shears and tynes, grader and dozer blades, conveyor screws and post hole augers etc.

Contact us for ordering information.

CAST2STEEL is a Nickel-Iron electrode designed for higher strength repair and maintenance welding of SG, Austenitic, Meehanite’s and Grey cast irons. It produces a soft stable arc with minimal penetration and spatter. The ductile Nickel-Iron weld deposit is machinable with the higher strength required for welding S.G. irons. Cast2Steel is also used to weld Cast Iron to Mild and Low Alloy Steels.